Heather Ballentine, Lamborghini sales specialist, finds out what Ceramic Pro is, why you would need it and essential to have it done by a certified installer like Bill’s Detailing.

VIDEO


At Bill’s Detailing Service, we offer the most trusted, certified installation of Ceramic Pro. Satisfaction from our customers and partners is what we strive for, and you will not be disappointed.

Check out our Ceramic Pro packages! >> Ceramic Pro 


We pride ourselves on being the best car detailing service in the Boston Area and the top Ceramic Pro installer.

Video: Paint Protection Film (PPF) VS Ceramic Coating: What's The Difference?

Whether its Ford vs Chevy, In n Out vs Shake Shake, or Yankees vs Red Sox, we all have our favorites and tend to be rather vocal about expressing that preference. This mentality extends into the paint protection world – especially when debating clear bra vs ceramic coatings.

There is no denying the fact that a paint protection film or professional-grade ceramic coating are the two best ways of protecting your ride from exposure to harmful contaminants, UV rays, and even light scratches. But, there are qualities that each delivers that gives it a nudge or a competitive edge over the other.

That’s what Adam Cote is going to explain in today’s Ceramic Pro video. Adam will enter the highly contested world of paint protection by comparing clear bra vs ceramic coatings. He’ll explain the differences between the two, introduce their pros and cons, and more importantly, provide factual information that will help you determine the two – so you can make an informed and logical decision.

 


At Bill’s Detailing Service, we offer the most trusted, certified installation of Ceramic Pro. Satisfaction from our customers and partners is what we strive for, and you will not be disappointed.

Check out our Ceramic Pro packages! >> Ceramic Pro 


We pride ourselves on being the best car detailing service in the Boston Area and the top Ceramic Pro installer.

Ford Raptor protected with Ceramic Pro!

 


At Bill’s Detailing Service, we offer the most trusted, certified installation of Ceramic Pro. Satisfaction from our customers and partners is what we strive for, and you will not be disappointed.

Check out our Ceramic Pro packages! >> Ceramic Pro 


We pride ourselves on being the best car detailing service in the Boston Area and the top Ceramic Pro installer.

How Is This Possible?

Ceramic Pro once cured, is measured to have hardness above 9H. Normal clear coat has hardness between 2H and 4H. The increase in the hardness of the coated surface is vast. This makes it the hardest paint coating on the market today. This new glass shield prevents minor scratches to your clearcoat and acts as a sacrificial layer. This preserves the original factory paint.

Any surface scratches that happen in the coating are easily removed with light polishing which will not weaken the integrity of the original clear coat. With Ceramic Pro your paint won’t fade or age due to the UV protection in the glass coating. Think of Ceramic Pro as an additional clear coat layer, only a lot harder. All of this allows for more peace of mind and a fuller enjoyment of your vehicle, even in harsh environments.

Glossy, slick and self-cleaning This nano technology allows the Ceramic nanoparticles to fill the smallest pores in the paint which makes the Ceramic Pro glass shield shiny, smooth and extremely slick or hydrophobic. Ceramic Pro dramatically lowers the surface tension preventing environmental contaminants such as: bird droppings, bugs, dirt, tar and graffiti paint from bonding to the surface. Water easily removes dirt from the surface by encapsulating it while rolling off the surface. This is called the self-cleaning effect.

Permanent protection Ceramic Pro 9H is a one-time application if maintained correctly. Once the Ceramic Pro glass shield has cured it can only be removed through abrasion like wet sanding. This puts Ceramic Pro in a category by itself, compared to sealants or waxes that degrade quickly.

 


At Bill’s we pride ourselves on being the best car detailing service in the Boston Area.


Some people thrive on overthinking decisions. It is important to analyze the pros and cons of making any major purchase, especially when it comes to protecting your daily driver. However, when it comes to weighing a professional-grade nano ceramic coat vs. a questionable DIY ceramic coating kit, it all breaks down to one simple question – which one do  you trust?

The intent of a ceramic coated car is to provide a long-lasting, protective shield, to block UV rays, light chemicals, road grime, animal waste, and other contaminants from damaging the substrate or surface that is coated.

Although many DIY ceramic coatings are capable of being applied to different materials, these all-in-one solutions simply don’t hold up the same. Some will last for about a year – while others might push the protection to 24 months.

With that said, here are six reasons why a professional coating like Ceramic Pro 9H is far superior to the best DIY ceramic coatings.

#1 – More Layers with Professional Coatings

One of the reasons why Ceramic Pro 9H is only applied in a controlled environment and by trained experts is the complexity of installation. The margin of error for applying and removing the coating is minimal with a pro-coating. DIY coatings have a larger window, but there is a drawback – you can’t apply multiple layers.

Well – technically you can apply several layers of a DIY ceramic coatings, and remove it with a microfiber towel, but it’s not going to bond or accomplish anything except waste your money. Let me explain.

A professional-grade nano paint coating can stack on top of each layer due to the professionally engineered carrier solvents – kind of like wax does. The drawback is that the installation and removal process is tedious, requires special training and is easy to mess up. The DIY coating removes most of the carrier solvents to make it easier for the average car enthusiast to apply.

But without this important ingredient, nano ceramic coating products can’t build depth. As such, you can apply multiple coats of DIY coatings – but it’s a waste of your time, money, and resources. It would be better to apply a few coats of a paint sealant. Ceramic Pro 9H ceramic coating on the other hand can build depth, which is why the layered packages can hold up for more than 5 years, protects the car paint against swirl marks, bird droppings, produces a hydrophobic coating, and is a true paint protection solution.

#2 – More SiO2 Is Not Always Better

When you read most blogs on DIY ceramic coating websites, they’ll actively promote the amazing SiO2 percentage in their formulations – claiming that the higher percentage of silicon dioxide leads to a stronger – more durable coating. That’s not true. In fact, SiO2 is the ingredient that helps provide a flat and smooth surface – or creates a super hydrophobic effect.

Titanium Dioxide or TiO2 is the main ceramic ingredient which impacts the hardness – or longevity. However, applying multiple coats of a coating with less SiO2 progressively adds depth and a flatter surface – producing better protection and super hydrophobic properties.

A car body coated with ceramic with water beading.

There are other ceramic coatings that contain no SiO2 or TiO2 that replicate an amazing slippery surface. So, if you only want to dazzle your friends with the car’s ability to repel water a few days after applying the coating – any coating will ‘work’ for that result. However, if you want true professional ceramic coating protection – don’t be hung up on SiO2 percentages.

#3 – Prep Work is Tricky and Time Consuming

There are a lot of positive reviews on some of the higher-grade DIY nano coatings. But, have you ever read them in detail? Most average car owner speak highly about how shiny the paint job on the vehicle looks after applying the DIY coating. However, keep scrolling down the review, and you’ll see a lot of complaints about the paint correction or prep work required.

Now let’s be clear – a car ceramic coating, regardless of the formulation, does not COVER UP scratches, blemishes, or minor damage on the car’s paintwork. Due to this fact, it’s vital to repair any imperfections prior to application. This is done via the prep work.

Ceramic car coating prep work consists of a decontamination car wash, clay bar treatment, paint correction (if any imperfections are present) and a final IPA (isopropyl alcohol) surface prep spray panel wipe. Depending on the condition of your vehicle’s paint surface, the prep work can take a manner of hours or days.

The same prep is recommended for paint protection film. Applying carnauba wax or ceramic wax also requires some level of prep.

When you opt for the DIY ceramic coating, you’re typically stuck with all the prep work on the car’s exterior that comes with it. However, you can choose to have a professional auto salon help with the prep if needed, but at that point, it makes sense to spend a few extra dollars for a genuine ceramic paint protection option.

#4 – A Unique Formulation for Different Materials

Ask any car detailer and they’ll tell you that there is no such thing as an all-in-one product for your car. DIY coatings are advertised as an all-in-one solution for protecting clear coats, glass, wheels, and vinyl. When you apply most of them to glass, it’s common to get streaking, or to grab more frequently – leading to inconsistent operation during rainstorms. If you apply to a clear coat on car’s paint, the DIY coating tends to work better.

The interior of a luxury SUV with ceramic coating treatment

The point is – with nano ceramic coatings, you can’t have an effective multiple surface protectant that is high quality. Different materials have larger or smaller porous surfaces, which means the coating protecting it needs to be uniquely formulated to penetrate those tiny imperfections, to bond and seal the surface, and harden correctly.

Ceramic Pro 9H has a ceramic coating for car’s paint, one for windows, a formula for vinyl and PPF, one for leather, and another for textiles. We also have coatings for industrial, marine, and commercial applications. We custom formulate every coating we offer – as opposed to contacting a chemical company and filling our bottles with stock formulas.

#5 – Consistent Results and No Mistakes

When you buy a DIY coating, you are taking a calculated risk that you won’t screw up the application. To be blunt, a large percentage of the paint correction services our professional detailers offer is fixing high and low spots from DIY ceramic coating installation jobs gone wrong. The customer will contact our pros and tell them they followed the directions, and for whatever reasons – the coating wouldn’t buff off the surface.

It’s not our job to blame anyone or assign a reason for these errors. But the truth is – they happen all the time. When you have a professional coating applied, by an experienced detailer in a controlled environment, mistakes like this simply don’t happen. And if they do – you’ll never receive your car back with those errors. It’ll be fixed and perfected prior to you picking up your car.

#6 – Warranty vs No Warranty

Our car ceramic coating – Ceramic Pro 9H is sold in three affordable packages. The bronze package is our entry-level coating, that protects your vehicle for up to two years – guaranteed. The silver package provides five years of warrantied protection. The gold package equals a lifetime of ceramic coating protection. There isn’t a single DIY coating with a WARRANTY.

Ceramic Pro 9H vs other paint protection products

There are some that are backed by money back guarantees for ‘expected longevity’ – but no warranty to fix or reapply the coating for you. These DIY ceramic kits usually cost the manufacturer about $5.00 – and sold to you at prices eclipsing $50 in most cases. Many of most popular DIY coatings are repackaged and rebranded cheap knock-offs.

Plus – the variables involved with DIY coatings and their installation, make it impossible for any company to offer a warranty. It’s really that simple.

What’s the Verdict on Pro vs DIY Coatings?

Simply put – if you want a true ceramic coating, the professional grade path is the one best traveled. Auto salons that offer Ceramic Pro 9H can customize a package that fits your needs, desires, budget, and expectations. Plus, each one will be backed by a warranty – in writing, documented on your Carfax vehicle history report, and inspected once per year by our expert installers.

With DIY coatings – you’re taking a calculated risk, applying a reengineered formula – that is simply not an effective protectant. Sure, it might make the paint shiny, might have water bead up and slip off the surface, but corn oil does the same thing.

If you’d like to explore your options with a professional-grade nano ceramic coating, click the button below to request a free estimate.

 

About Bills Detailing Service

Bills Detailing Service is the top Boston Ceramic Pro Installer. Established in 1993 by owner William Lima, Bill’s Detailing Service provides you with years of expertise in automotive detailing.

Our team has gone on to create a unique level of superior customer service in the automotive detailing industries. Our technicians are professionally trained and experienced to provide you with the finest quality detailing service available.
We offer pick up and drop off service for the days that you need your car cleaned as soon as possible! We want you to be completely satisfied with our work, and cause a minimal interruption in your day.

Video: THE PROFESSIONALS' CHOICE: KAVACA PPF

KAVACA is a high-tech PPF for your vehicle that will protect it from physical damage, aggressive chemicals, and dirt. It can self-heal minor scratches in mere seconds KAVACA SMART CUT is an advanced software for plotter cutting with templates database of all car producers for both, exterior and interior. Get in touch with your KAVACA local installer or national dealer for more information on how to protect your vehicle with the newest technology!

What is Instant Healing Paint Protection Film technology?

This means that scratches made on the surface will heal in under 1 second (view image below for reference).  This is almost too fast for the naked eye to see but mind-blowing when you see it in person. Combined with these properties: unmatched gloss, clarity, and hydrophobicity, Kavaca is the most advanced and best looking Paint Protection Film on the market. Not only does the preexisting Top Coat and appearance of Kavaca films far surpass every other protective film on the market, but also it has Nanotechnology infused in the adhesive that fills swirls and imperfections in the paint. So what does the name Kavaca mean? Kavaca means Armor in Sanskrit. Meaning that this paint protection film is the Ultimate Armor For Your Vehicle!

Kavaca Instant Healing Film is also easier to install than most other films on the market. Which as a consumer translates to a better installation. It has 50% more stretch/elasticity and the nanotechnology in the adhesive allows the film to be easily positioned while providing the perfect amount of tac/anchor point to cover hard shapes on a vehicle’s painted surface. The nanotechnology infused adhesive also helps hide certain imperfections on the surface that otherwise would prevalent or be enhanced by other films.

Why Kavaca Paint Protection Film?

Kavaca PPF is manufactured using state of the art technologies and top quality raw materials. With the impressive visual appearance, the film acts as a self-healing protective layer preventing the paint from being damaged from abrasion, corrosion, chemicals and other types of physical damage. Combined with these properties: unmatched gloss, clarity, and hydrophobicity,  Kavaca is the most advanced and best looking Paint Protection Film on the market. Many years of experience in the industry of surface protection and extensive research, formulated a perfect PPF to be used along with Ceramic Pro coatings to maximize the performance of our surface protection systems. Kavaca offers instant-healing properties without the need to heat the surface and also offers non-yellowing properties. It has been developed for the automotive industry for paint protection, but due to its outstanding quality can be used in any sphere that requires PPF installation.

KEY PROPERTIES:

  • Industry Leading Gloss
  • 50% more stretch than leading competitors
  • Reduced orange peel and no glue marks with PPF installation GEL
  • Nanotechnology infused that fills swirls & imperfections
  • Advanced chemical and corrosion resistance
  • Instant scratch healing (No heat required)
  • Resistance to high temperatures
  • Limited Lifetime Warranty
  • Ceramic Pro Hydrophobic Properties
  • A protective barrier for high impact areas

About Bills Detailing Service

Bills Detailing Service is the top Boston Ceramic Pro Installer. Established in 1993 by owner William Lima, Bill’s Detailing Service provides you with years of expertise in automotive detailing.

Our team has gone on to create a unique level of superior customer service in the automotive detailing industries. Our technicians are professionally trained and experienced to provide you with the finest quality detailing service available.
We offer pick up and drop off service for the days that you need your car cleaned as soon as possible! We want you to be completely satisfied with our work, and cause a minimal interruption in your day.

Ceramic Pro Technology Has Been Tested And Proven

TESTED BY SGS, THE WORLD’S LEADING INSPECTION, VERIFICATION AND CERTIFICATION ENTITY.

Ceramic Pro coating technology is outstanding because it works. Not only has the product developed a reputation of being the best in the industry, but we also have data to prove it. Ceramic Pro products have been tested by SGS to prove that all the claims are real. Results not only show that they perform as advertised, but also show key points about the hardness, flexibility, adhesion with real quantifiable numbers.

REAL QUANTIFIABLE RESULTS

NON TOXIC
Ceramic Pro is a non-toxic product and the tests that have been conducted by SGS are: ASTM F963-08 (4,3,5) Heavy Metal Lead, Antimony, Arsenic, Barium, Cadmium, Chromium, Mercury, Selenium. Result: Not detected in all tested substances.

UV PROTECTION
The UV protection keeps paint, rubber and plastic from aging. The tests conducted by SGS; ASTM G154-06 and ASTM D2244 determine color changes on surfaces exposed to UV rays. Result: No color change detected.

DURABILITY
ASTM D3359 Adhesion test. This test covers assesses the adhesion of coating films to metallic substrates by applying and removing pressure-sensitive tape. Result: No coating loss even when using the strongest tape.

  • CHARACTERISTICS

Temperature

The coating can be applied in temperatures as low as -20 Fahrenheit. Once cured, the coating provides protection from extreme temperatures ranging from -50 to 2,200 Degrees Fahrenheit.

Oxidation & Corrosion Resistant

Ceramic Pro protects paint and metal from coming into contact with water and oxygen preventing oxidation and corrosion. The ASTM B117 Salt Spray Corrosion Test provides a controlled corrosive environment which has been utilized to produce relative corrosion resistance information for specimens of metals and coated metals exposed in a given test chamber. The chemical tests conducted by SGS and internally are: 5% salt spray for 350 hours with results of no visible damage, as well as 5% salt spray for 5000 hours with no visible damage (internal test).

Chemical Resistance

The coating has 100% resistance against damaging contaminants and harsh chemicals. Once cured, the only way to remove the coating is through heavy abrasion. The chemicals tested and conducted by SGS include: JIS K5400 Alkali, Acids and Salt. This test method identifies how well the coating resists sodium carbonate, sulfuric acid and sodium chloride despite heavy exposure. Result: 5% Na2CO3 for 24 hours: No visible damage, 5% H2SO4 for 24 hours: No visible damage, and 5% NaCL for 96 hours: No visible damage.

SGS Test

The tests have been conducted by SGS. SGS is the world’s largest and leading inspection, verification, testing and certification company trusted by millions.

Gloss Level – High- (depends on substrate)
Viscosity #2 Zahn Cup- 12~14 seconds
5% Salt Spray (ASTM B117)- 350 hrs
Pencil Hardness (JIS 5400)- Above 9H
Adhesion Cross-Cut Tape (ASTM D3359)- 5b (no coating loss)
Mandrel Bend (ASTM D522)- 0 mm coating loss at 180° rotation
Impact (ASTM D2794)- 80/80 inch-lbs

Official Documents:
Hardness by Pencil Test (500g), Alkali Resistance, Acid Resistance, Salt Solution Resistance
Hardness by Pencil Test (1000g)
Toxicity Test Ceramic Pro 9H (Non Toxic) Scratch Tests/Hardness
Toxicity Test Ceramic Pro Series Light, Leather, Plastic (Non Toxic) Scratch Tests/Hardness

Flexibility

Ceramic Pro has proven to be a perfect coating for surfaces that are exposed to expansion and deformation. The test conducted by the SGS is the Mandrel Bend Test (ASTM D522 test). This test is useful in evaluating the flexibility of coatings on substrates. Result: 0 mm of coating loss at 180° rotation.

Hardness

In the coating industry a products hardness or ability to resist scratches is determined by the pencil test. In the Pencil test conducted by SGS (JIS K5400) a coated panel is placed on a firm horizontal surface. The pencil is held firmly against the film at a 45° angle (pointed away from the operator) and pushed away from the operator in a 0.256-inch strokes. On a scale ranging from 6B (softest) to 9H (hardest), Strong has been tested and classified above 9H. impact In the Impact resistance testing conducted by SGS (ASTM D2794 test) coatings attached to substrates are subjected to damaging impacts during the manufacture of articles and their use in service. This test method for impact resistance is useful in predicting the performance of organic coatings and their ability to resist cracking caused by impacts. Result: 80/80 inch pounds.

Adhesion

The test conducted by SGS is the ASTM D3359 Adhesion test. This test covers procedures for assessing the adhesion of coating films to metallic substrates by applying and removing pressure-sensitive tape over cuts made in the film. Result: 5B (No coating loss when using strongest tape).

UV Protection

The UV protection keeps paint, rubber and plastic from aging. The tests conducted by SGS; ASTM G154-06 and ASTM D2244 determine color changes on surfaces exposed to UV rays. Result: No color change

Weight

A cured layer of Strong weighs between 0.2 to 1 gram/square foot depending on porousness of the surface.

Hydrophobicity

A surface level of hydrophobia is dependent on the water contact angle of the surface. The higher angle the less dirt or liquid will attach to the surface. Strong 2.0 has a contact angle of at least 110 degrees.

Electrical Resistivity

The coatings ability to conduct electricity in room temperature is extremely low. With higher temperatures the conductivity increases.

Gloss or Color Changes

The coating does not always increase gloss. It preserves the shine of a surface at the time of treatment. Color and shine depend on the surface being treated.

Nontoxic

Ceramic Pro is a non-toxic product and the tests that have been conducted by SGS are: ASTM F963-08 (4,3,5) Heavy Metal Lead, Antimony, Arsenic, Barium, Cadmium, Chromium, Mercury, Selenium. Result: Not detected in all tested substances.

ECHA REACH test Ceramic Pro has been tested against 144 substances of very high concern (SVHC) screening. SVHC candidate list based on the publication by European Chemicals Agency (ECHA) on June 2013. Result: Not detected in all tested substances.

VOC Ceramic Pro Strong is VOC compliant at 5.2 g/liter.


At Bill’s Detailing Service, we offer the most trusted, certified installation of Ceramic Pro. Satisfaction from our customers and partners is what we strive for, and you will not be disappointed.

Check out our Ceramic Pro packages! >> Ceramic Pro


We pride ourselves on being the best car detailing service in the Boston Area and the top Ceramic Pro installer.

Kavaca from Bill's Detailing

THE PPF that professionals choose!

Tired of worrying about your vehicle’s paint job condition? Already spending time and money on fixing rock chips and scratches from branches? If you want your vehicle to look even more impressive, always new and in perfect condition, there is a solution!

Introducing Kavaca Paint Protection Films from the manufacturer of Ceramic Pro protective coatings, Nanoshine Group. Kavaca is a high-tech armor for your vehicle that will protect it from physical damage, aggressive chemicals, and dirt. It can self-heal minor scratches in mere seconds even without applying heat. The high quality of the films ensures long-lasting resistance to yellowing from UV, enhanced gloss, and color saturation!

Kavaca is the solution you’ve been waiting for! So, get in touch with your local installer or national dealer for more information on how to protect your vehicle with the newest technology for good!

Why Kavaca Paint Protection Film?

Kavaca PPF is manufactured using state of the art technologies and top quality raw materials. With the impressive visual appearance, the film acts as a self-healing protective layer preventing the paint from being damaged from abrasion, corrosion, chemicals and other types of physical damage. Combined with these properties: unmatched gloss, clarity, and hydrophobicity,  Kavaca is the most advanced and best looking Paint Protection Film on the market. Many years of experience in the industry of surface protection and extensive research, formulated a perfect PPF to be used along with Ceramic Pro coatings to maximize the performance of our surface protection systems. Kavaca offers instant-healing properties without the need to heat the surface and also offers non-yellowing properties. It has been developed for the automotive industry for paint protection, but due to its outstanding quality can be used in any sphere that requires PPF installation.

KEY PROPERTIES:

  • Industry Leading Gloss
  • 50% more stretch than leading competitors
  • Reduced orange peel and no glue marks with PPF installation GEL
  • Nanotechnology infused that fills swirls & imperfections
  • Advanced chemical and corrosion resistance
  • Instant scratch healing (No heat required)
  • Resistance to high temperatures
  • Limited Lifetime Warranty
  • Ceramic Pro Hydrophobic Properties
  • A protective barrier for high impact areas

About Bills Detailing Service

Bills Detailing Service is the top Boston Ceramic Pro Installer. Established in 1993 by owner William Lima, Bill’s Detailing Service provides you with years of expertise in automotive detailing.

Our team has gone on to create a unique level of superior customer service in the automotive detailing industries. Our technicians are professionally trained and experienced to provide you with the finest quality detailing service available.
We offer pick up and drop off service for the days that you need your car cleaned as soon as possible! We want you to be completely satisfied with our work, and cause a minimal interruption in your day.

Video- What is Ceramic Pro How does it work

In this week’s episode with Matt Kelly, we answer the question: What is Ceramic Pro? Find out everything you need to know about Ceramic Pro & how it works!

 

 


At Bill’s Detailing Service, we offer the most trusted, certified installation of Ceramic Pro. Satisfaction from our customers and partners is what we strive for, and you will not be disappointed.

Check out our Ceramic Pro packages! >> Ceramic Pro


We pride ourselves on being the best car detailing service in the Boston Area and the top Ceramic Pro installer.

Aston Martin Bills Detailling

How to Apply Ceramic Pro CARE

Making the proactive decision to invest in Ceramic Pro 9H coating to protect your ride from UV rays, natural acids and contaminants is a smart one indeed. But how do you protect that 9H hardness ceramic coat? This is where Ceramic Pro CARE comes into play, a revolutionary water-based coating enhancement spray that can be used on wet or dry surfaces.

Ceramic Pro is designed to protect your factory clear coat, to provide a protective shield against the elements and to keep your vehicle looking new always. To maximize the effects of Ceramic Pro and to ensure your investment is long lasting, a few basic maintenance steps should be taken. With simple care, your ceramic coating will reward you for years to come.

This is what we’ll explore in the information below. With the support of a few great videos – we will outline the steps for correctly applying and using Ceramic Pro CARE. We’ll also provide a few washing and aftercare best practices, to get the most longevity, durability, and protection from your Ceramic Pro 9H Coating.

Learn More »


At Bill’s Detailing Service, we offer the most trusted, certified installation of Ceramic Pro. Satisfaction from our customers and partners is what we strive for, and you will not be disappointed.

Check out our Ceramic Pro packages! >> Ceramic Pro


We pride ourselves on being the best car detailing service in the Boston Area and the top Ceramic Pro installer.